1
2
3
4
5

CleanTouch™

CleanTouch™ is an economic and ergonomic device for cleaning optical connectors and bare fibers. By merely touching a connector ferrule against the CleanTouch substrate, all contaminants are removed. Delicate bare fibers are easily cleaned without the possibility of breakage or damage to the endface surface.

Starting at
$ 225
April 29, 2020, 6:46 p.m.
Q
Is there a video I can watch on how to properly clean a connector using this CleanTouch product?
A
We do not have a video. However, the correct procedure is just to lightly touch the ferrule tip to the cleaning port and remove. Do not twist or wipe. No solvents are required. It is suggested to use each port only once. If you would like a sample, please contact sales@krelltech.com.
April 9, 2020, 5:36 p.m.
Q
What are the dimensions of CleanTouch with the cover closed?
A
3.5 inches x 2.75 inches
April 3, 2020, 5:43 p.m.
Q
Do these support LC connectors?
A
Yes, these support LC Connectors.
March 26, 2020, 6:31 p.m.
Q
What are these used for?
A
To clean the connector endface.
March 23, 2020, 4:18 p.m.
Q
How many cleaning ports does each CleanTouch card contain?
A
Each CleanTouch has 72 cleaning ports.
Jan. 3, 2020, 5:51 p.m.
Q
Can a CleanTouch cleaning port be used more than once?
A
Yes, but with each use, the cleaning effectiveness will diminish.

CLEANTOUCH™ Text2 Innovative Fiber Optic Cleaner UNIQUE ERGONOMIC CLEANING ONE STEP CLEANING SELF CONTAINED PACKAGING POCKET SIZED NO SOLVENTS REQUIRED LOW COST PER Krell Technologies’ CleanTouch is a compact CONNECTOR and cost effective alternative to standard connector cleaners. A connector or bare fiber is simply touched against a cleaning port that removes all contaminants. This single step process causes all contaminants such as dirt and dust to remain on CleanTouch. No solvents, compressed air or costly dispensers are required. Ordering Information Part No: CT-50, Box of 50 CleanTouch krell technologies, inc. · tel: (732) 617-7091 · sales@krelltech.com · www.krelltech.com

Download